J&D Leathercraft Setting Tool Copper Rivet and Burrs Fastener Stainless Steel Leather Setter, to Install Solid Copper Rivets in Leatherwork
Install solid copper rivets and secure burrs on your leather creations using this stainless steel setter. This tool helps in fastening pieces of leather together with a few simple blows of a mallet.
Attach pieces of leather together using solid copper rivets with the help of this sturdy and affordable stainless steel setter. This handy tool has holes for tightening and securing the burrs and the concave hollow at the top for installing the rivets with just a simple blow of a leather mallet or hammer.
This tool can be used for making leather items such as wallets, purses, cardholders, and more. A very useful addition to your craft tools at a low price.
Please note this tool is for heavy duty copper rivets, and not the hollow, light weight rivets that are used for lighter fastening applications.
Approximate dimension & product data:
- Dimensions: 120x20x12mm
- Hole diameters: 4.2mm & 3.5mm
- Material: Stainless steel
- Weight: 211g
To use this rivet setter, first, punch a hole in the leather you wish to fasten. Make sure the size of the hole punch matches the shank of the rivet. Insert the rivet into the hole from one side then inset a burr onto the shank on the other side. Set the leather and rivet on an anvil or any similar material then use a mallet or hammer and the open hole on the side of the setting tool to press the burr down onto the leather. Clip the rivet about 1/8th of an inch above the burr then use the dome section of the setting tool to further set the rivet.
This listing is for the rivet setter only. Photos showing other objects are for illustrative purposes only.
|Net weight||211 g|