Seiwa Neon Green Fabrier Pigment Fabric Dyeing Color 35ml Fluorescent Leathercraft Dye, for Fabric & Leather Painting
This paint for fabric and leather is easy to apply and develops vivid color. It can be used on clothes, bags, and as an edge coat for leather-made items such as wallets, cardholders, and other similar products.
Paint your creative designs on fabric and leather using this Fabrier Neon paint, manufactured by Seiwa. This variant of Fabrier produces fluorescent color as it absorbs and reflects more light compared to other conventional dyes, and is vivid in appearance even on dark-colored leathers and fabrics due to its non-transparent finish. Fabrics that are suitable for this paint include cotton, rayon, hemp, silk, polyester, and denim. When fully dried, it becomes durable and elastic, making it possible not to produce cracks and crumbles when applied to your clothes, bags, and other similar things that can be folded or stretched.
After application, allow your painted design to dry for a whole day to ensure it is completely dry and will not produce stains. Iron at a suitable temperature to improve its durability. Use different kinds of materials such as stencils, rubber stamps, and brushes to create more designs for your fabric and leathercrafts. Fabrier Neon is available in four colors (each sold separately).
Available Colors (sold separately):
• Neon Yellow
• Neon Orange
• Neon Pink
• Neon Green
• Water-Based Acrylic Resin Pigment
Fabrier products can be applied as easy as using ordinary paints. It can be applied on cloth and leather using a variety of tools such as stencils, stamps, sponges, and brushes. Fill a small container with a little amount of Fabrier and dilute it out with Fabrier diluent to make it easier to apply, check it with your brush (or any other item you'll be using) before applying it to your fabric or leather.
To use in finishing leather edges, begin by polishing the edge with a burnishing gum and leather burnisher before applying Fabrier. Then use 400 grit sandpaper to smooth it out. Reapply burnishing gum a second time and rub it in with a leather burnisher. Using sandpaper, smooth up the surface of the leather edge, but this time use an 800 grit. Prepare Fabrier, a brush for applying the paint, and a small container for diluting the paint with water or a diluent to make it easier to apply. Apply the paint to the leather's edges two to three times, allowing each coat to dry for 20 to 30 minutes. After it has dried, smooth it with 2000 grit sandpaper and finish the process by painting it again.
Please note the following:
- This listing is for Fabrier Neon Green 35ml only. Photos showing other products and materials are for illustrative purposes only.
- Store in a cool, dry place. Keep out of the reach of children.
- This product is not suitable for leather repair, or to otherwise improve the cosmetic appearance of damaged leather.
|Net weight||35 g|