Seiwa Pop Orange Leathercraft Fabrier Pigment Water Based Acrylic Resin Paint Colored Dye 35ml, for Fabric & Leather Dyeing
Safe to use and easy to apply, Fabrier Pop paint is great for leather and fabric. It can be used to create designs on your clothes, shoes, and other items.
This Fabrier Pop is great to decorate your fabric and leather-made items. A highly opaque acrylic paint made by Seiwa that can be used in most types of fabric such as cotton, rayon, linen, silk, polyester, and denim. It has a softer and more flexible finish compared to conventional products, so it does not crumble and break apart easily when the fabric or leather it was applied to is stretched or folded. Fabrier Pop comes in 12 colors (each sold separately) and can be mixed with each other so you can create more colors and designs suited to your style.
Fabrier Pop is nontransparent and will produce a raised texture so it can be used on any color of the fabric. It will appear the same on either a light or dark surface. This product can be stenciled, stamped, sponged, or brushed onto fabrics or leathers.
Available Colors (sold separately):
- Light Green
- Sky Blue
- Water-Based Acrylic Resin Pigment
- Butane Gas
To use this Fabrier on finishing leather edges, first, polish with burnishing gum and rub with a slicker. Re-apply burnishing gum and rub it again with a slicker after trimming it with 400 grit sandpaper. Smooth the edges with 800 grit sandpaper this time. Prepare the Fabrier, the dye brush, and a clean ceramic basin or a small container. In the container, combine an appropriate amount of Fabrier with a diluent or a small amount of water. Apply with a brush to the edges of the leather and let it dry for a few minutes. For optimal results, reapply the paint. Then rub the leather slicker again on the edges. Using sandpaper with a grit of 2000, smooth the cutting edge. Finish by reapplying Fabrier one last time and letting it dry.
To use on the surface of a fabric or leather products, put a suitable amount of Fabrier in a small container or a ceramic bowl. Paint using different kinds of materials such as brush, sponge, and stamp. Two to three times is the suggested application. Allow 20-30 minutes for it to dry before reapplying. If the paint is difficult to spread, add a diluent or water to the Fabrier.
Please note the following:
- This listing is for Fabrier Pop Orange 35ml only. Photos showing other objects are for illustrative purposes only.
- Store in a cool, dry place. Keep out of the reach of children.
- This product is not suitable for leather repair, or to otherwise improve the cosmetic appearance of damaged leather.
|Net weight||35 g|