Seiwa Pop Yellow 35ml Fabrier Pigment Fabric Dyeing Color Water Based Acrylic Leathercraft Dye, for Fabric Painting
With its flexible and elastic characteristics, Fabrier Pop is not easy to break when dried after applying on fabrics and leather. It is available in various colors that can be mixed to match your style.
🔒 Secure checkout
✈️ Get your order in as soon as three days*
🌏 Worldwide shipping available
Get creative with this Fabrier Pop fabric and leather dye manufactured by Seiwa. Suitable for leather, and many kinds of fabrics, including rayon, silk, linen, cotton, polyester, and non-slip nylon fabrics. This product is composed of water-based acrylic resin pigment and butane gas with 12 different colors to choose from (each sold separately). It can take repeated folds and stretches created on the fabric or leather without breaking because of its suppleness.
Create freehand designs or apply it using rubber stamps, stencils, and sponges. After painting, allow it to dry for approximately 12 to 24 hours. Apply two or three times for a better finish. Fabrier Pop is opaque and will have a raised texture so you can use it even on dark surfaces.
Available Colors (sold separately):
• Light Green
• Sky Blue
• Water-Based Acrylic Resin Pigment
• Butane Gas
To use this Fabrier on cutting edges of leathercraft, Apply burnishing gum and rub with a slicker to finish the edges. Trim it with 400 grit sandpaper, then re-apply burnishing gum and rub it again with a slicker. This time, use 800 grit sandpaper to trim the edges. Prepare Fabrier, brush for applying the dye, and a ceramic bowl or any clean container. Put an appropriate amount of Fabrier into a ceramic bowl and mix it with a diluent or small amount of water. Apply on the edges of the leather using a brush then allow it to dry for a few minutes. Re-apply paint for better results. Then rub it with a leather slicker. Smooth the cutting edge with 2000 grit sandpaper. Re-apply Fabrier for the last time then dry to finish.
To use Fabrier on fabric and leather goods, put an appropriate amount on a small container or a ceramic bowl. The recommended application is two to three times. Allow it to dry for 20-30 minutes before re-applying. You may add a diluent or water to the Fabrier if the paint is difficult to spread.
This listing is for Fabrier Pop Yellow 35ml only. Photos showing other objects are for illustrative purposes only.
Please note: Store in a cool, dry place. Keep out of the reach of children.
|Net weight||35 g|