Seiwa Neon Yellow Fabrier Pigment Fabric Dyeing Color 35ml Fluorescent Leathercraft Dye, for Fabric & Leather Painting
This Fabrier Neon acrylic dye can be used in adding vivid colors on your fabric and leathercrafts. Create colorful designs on your clothes, bags, shoes, and other similar products.
This Fabrier Neon acrylic dye from Seiwa features a high level of flexibility and elasticity, suitable to use in leathercraft and different kinds of fabric such as silk, cotton, rayon, linen, and denim. It can withstand folds and stretches so you can appreciate the color designs without worrying about cracks and other damages. This type of Fabrier is opaque and will provide more vivid colors even when applied on dark-colored surfaces than any other conventional dyes. Available in four different colors for creating colorful designs and artworks on your leather or fabric (each sold separately).
You can apply it on the fabric or leather by freehand using only a brush, or with a stencil for more detailed designs. When used on fabrics, iron at a suitable temperature for the fabric to finish your work when the paint is dry enough to be touched by your fingers. For thin applications, the standard drying time is 20-30 minutes and 24 hours for complete drying. It can also used for coating edges of leather for finishing.
Available Colors (sold separately):
• Neon Yellow
• Neon Orange
• Neon Pink
• Neon Green
• Water-Based Acrylic Resin Pigment
You can use Fabrier products similar to using conventional paint. Various materials such as stencils, stamps, sponges, and brushes can be used for applying Fabrier to your fabric and leather items. Add an appropriate amount of paint on a small container then dip the brush (or any material you will use) on the paint then apply it to your fabric or leather.
For leather edge application, start by polishing the edge using a burnishing gum and leather burnisher. Then smooth it out using 400 grit sandpaper. Apply burnishing gum for the second time and rub it with a leather burnisher to finish. Even out the surface of the leather edge using sandpaper, but this time, use an 800 grit instead. Prepare Fabrier, brush for applying the paint, and a small container for mixing the paint with diluent to thin it down for better application. Apply the paint on the edges of the leather two to three times, with 20 to 30 minutes of drying time between applications. Smooth it with 2000 grit sandpaper after drying then paint it one more time to complete the process. Edge coat application may vary depending on the type of chemical.
This listing is for Fabrier Neon Yellow 35ml only. Photos showing other products and materials are for illustrative purposes only.
Please note: Store in a cool, dry place. Keep out of the reach of children.