Seiwa Pop Red Leathercraft Fabrier 35ml Fabric & Leather Dyeing Color Water Based Acrylic Resin Pigment, for Leatherwork Painting | Goods Japan

Seiwa Pop Red Leathercraft Fabrier 35ml Fabric & Leather Dyeing Color Water Based Acrylic Resin Pigment, for Leatherwork Painting

A safe and easy to apply fabric and leather paint to personalize your clothes, shoes, and other items. Mix it with other Fabrier Pop to create colors that suit your style.

USD 4.99 *
1 piece

In stock

Japan Postl EMS FedEx

* Incl. VAT excl. Shipping

Make your clothes, bags, and shoes a one of a kind item by customizing it using this Fabrier Pop paint manufactured by Seiwa. Choose from the 12 vibrant colors (each sold separately) including this Pop red to create highly opaque designs that will not easily crumble even if it undergoes repeated folds and stretches. It can be used on various kinds of fabric, including rayon, hemp, silk, polyester, denim, and cotton. It bulges after drying so it is suitable on both dark and light-colored fabrics. 

The application can be done using rubber stamps, stencils, brushes, sponges, and many more. After painting, allow it to dry for up to one day to ensure its durability and it will be finished. Paint your design about two to three times for better results.

Available Colors (sold separately):

• Yellow
• Orange
• Red
• Pink
• Light Green
• Green
• Sky Blue
• Blue
• Violet 
• Brown
• White
• Black


• 35ml


• Water-Based Acrylic Resin Pigment
• Butane Gas

To use this Fabrier on leather edges, apply burnishing gum first, then finish with a slicker. After polishing, use a 400 grit sandpaper to smooth the surface. Then after reapplying burnishing gum, smooth the edges with the leather slicker again, this time with 800 grit sandpaper. Prepare the Fabrier, as well as a brush and a small ceramic basin or container. If the paint is hard to spread, dilute with water. Apply to the leather edge in a uniform manner. Allow it to dry for a few minutes before applying another coat of Fabrier. Reapply, then rub with a leather slicker when it has dried. Using 2000 grit sandpaper, smooth the leather edge. Apply Fabrier one last time to finish the job, then let it dry. Depending on the chemical, the application of the edge coat may differ.

Fabrier can be used on leather and fabric in the same way as ordinary paints can do on a paper. To use on the surface of a fabric or leather product, place a moderate amount of Fabrier in a small container or ceramic bowl. Brushes, sponges, and stamps are just a few of the painting materials the can be used. Two to three times is the suggested application. Allow for 20-30 minutes of drying time before reapplying. If the paint is difficult to spread, add diluent or water to the Fabrier.

Please note the following: 

  • This listing is for Fabrier Pop Red 35ml only. Photos showing other objects are for illustrative purposes only.
  • Store in a cool, dry place. Keep out of the reach of children.
  • This product is not suitable for leather repair, or to otherwise improve the cosmetic appearance of damaged leather.

Item ID 21352
Condition New
Manufacturer Seiwa
Manufacturing country Japan
Net weight 35 g
Weight 135 g