Oka Ebony Stitching Groover Adjustable Leathercraft Hand Sewing Grooving Tool Leather Edge Groover, with Ebony Handle, for Leatherworking
This brand new Japanese Adjustable Leather Stitching Groover is great for making guides for overstitch wheel used in hand stitching and creating a design for your leathercraft projects.
This brand new Japanese Adjustable Leather Stitching Groover comes with a smooth and luxurious ebony handle, and machined brass ferrule, ensuring many years of use. Appointed with quality made Japanese parts to ensure the highest level of aesthetic and quality workmanship for making grooves in your leathercraft, for your overstitch wheel or pricking iron.
A handy tool for cutting grooves near the edge of leather work to ensure your stitching will be flush with the surface of your leather, increasing the life of your leathercraft.
Approximate Dimensions & Product Data:
- Handle (Ebony)
- Ferrule (Machined brass)
- Weight: 125g
- Blade (Tempered steel with anti-corrosion coating)
To use this Stitching Groover, loosen the knurled locking nut and adjust the blade depth, depending on how far you want the stitch grooves to be from the edges of your leather, and re-tighten the locking nut until the blade is firmly in place, with the blade pointing forward. Once adjusted, grip the handle firmly then place the Stitching Groover on the surface of the leather where you want to create a groove. Make sure the centre tip of the Stitching Groover is placed outside the leather edge, because this will be your guide in making straight groove lines. Tilt the tool at a 30 to 45 degree angle with the blade edge touching the surface of the leather. Then pull along the edge while pushing the tool down to cut a groove in your leather. Add more pressure to make more deep grooves.
Please note: The blade edge is sharp, keep away from reach of children.
|Net weight||240 g|