PMC Precious Metal Clay Silver Firing Vessel Ceramic Sinter Pan Tray 60x80x35mm, for Sintering Silver Clay Jewelry
This ceramic firing tray is excellent for firing bronze clay, copper clay, PMC PRO and Accent Silver in a bed of activated carbon.
This ceramic firing vessel works as a sintering pan or tray and is excellent for firing bronze clay, copper clay, PMC PRO and Accent Silver in a bed of activated carbon. This vessel measures around 60x80x35mm.
To use this PMC Pro Silver Clay Firing Vessel Ceramic Sinter Pan 60x80x35mm Tray, simply place 10mm of activated carbon in the tray, place your dried PMC creations on top of the carbon, and pour more carbon on top of your artwork covering it completely without the carbon going higher than the tray's rim. Next, seal the top with an appropriate foil or a lid, and you're ready for sintering. Please follow the instructions for firing PMC products to determine the required temperature.
In time, ash deposits will build up on activated carbon every two to three firings. To clean, simply pour the activated carbon from one container to another, from a height of a few centimeters for about two or three times and let the air carry away the dust. The following procedures work best when used outside.
Note: This ceramic sintering tray can withstand temperatures of about 1250 degrees Celsius.
|Net weight||100 g|