Craft Sha Leathercraft Dye Quick 500ml Water Based Leather Dye Green No.21 Fast Penetration for Leather Coloring, Staining and Dyeing
Build an even green colour across leather with a dye made for quick, thorough penetration. Adjust the shade with water, add further coats after drying, or blend compatible colours, giving leatherworkers practical control over concentration and colour development.
New item
In stock
🔒 Secure checkout (Credit Card, Bank Transfer, & PayPal available)
✈️ Get your order in as soon as three days*
🌏 Worldwide shipping available
💰 Save on shipping when you buy multiple items
This Craft Sha Leathercraft Dye Quick Green No.21 is a 500ml water-based basic leather dye developed for quick penetration and even colouring. It applies the manufacturer’s Green shade to leather while allowing the colour strength to be adjusted through dilution, repeated applications, or compatible dye mixing.
Apply the dye with a soft-bristled brush or high-density craft sponge. It can be diluted with water to obtain the required concentration, layered after drying, or blended with other compatible Craft Sha dyes to produce custom colours. The narrow pouring spout helps transfer the dye into a mixing dish with greater control.
• Product type: Leathercraft dye
• Product range: Dye Quick
• Colour: Green
• Variation number: No.21
• Volume: 500ml approximately 17 US fl oz
• Formula: Water-based basic dye
• Application methods: Soft-bristled brush or high density craft sponge
• Dilution information: Dilute with water to the desired shade
• Manufacturer dilution examples: Dye to water ratios of 1:5 and 1:10
• Mixing compatibility: Mixable with compatible Craft Sha dyes, including Dye Quick colours
• Key features: Quick and even dyeing, low odour formulation, and narrow pouring spout
• Country of origin: Japan
Variations (each sold separately):
• No.01 Light Yellow
• No.02 Yellow
• No.03 Orange
• No.05 Yellow Brown
• No.07 Maroon Brown
• No.08 Brown
• No.10 Dark Brown
• No.12 Red
• No.13 Dark Pink
• No.14 Azalea Pink
• No.16 Purple
• No.17 Light Blue
• No.18 Blue
• No.19 Navy Blue
• No.22 Dark Green
• No.24 Black
Before treating the main piece, test the prepared dye on an identical piece of scrap leather. Dampen the whole leather surface with clean water using a sponge, then dilute or mix the dye until the intended colour is prepared. Spread it evenly with a brush or sponge, changing the brush direction during application to help prevent streaks. Allow the leather to dry completely before evaluating the shade, and apply another coat when further colour depth is required.
Wet leather appears darker than the final dried result, so the shade should be checked only after the surface has dried. Once the desired colour has been reached and the leather is completely dry, apply 2 to 3 coats of Craft Sha Leather Lacquer to help reduce colour rubbing or fading. Always confirm the selected mixture on scrap leather before full application.
Please note that leather dyes will only yield desired results on untreated and uncoloured vegetable tanned leather. Application of dyes to already dyed/coloured leather will result in discolouration and darkening of the existing leather colour, and application of dyes on treated (e.g., waxed, lacquered, oiled, etc.) leather may result in inconsistent absorption.
| Technical characteristic | Value |
|---|---|
| Item ID | 45873 |
| Condition | New |
| Model | 2667-21 |
| Manufacturer | Craft Sha |
| Manufacturing country | Japan |
| Net weight | 505 g |
| Weight | 605 g |
| Customs tariff number | 3204.13-000 |
JAN Code: 4531785067637
5
4
3
2
1
Loading reviews...
Delete review
Will be available very soon!
Similar products
Recommended for you