Kyoshin Elle Leathercraft Tool Punching Tool Medium Diamond Shaped Leather Hole Punch 8.5mm x 5.4mm, to Add Decorative Holes in Leatherwork
With this high-quality diamond (rhombus) shaped punch, you can make decorative holes in your leather. The results are better when working with damp leather. Small, medium, and large sizes are available.
This quality diamond (rhombus) shaped hole punch from Kyoshin Elle is great for all kinds of ornamental designs. Punch holes in your leather with artistic flair with this quality, medium sized, shaped hole punch. This handcrafted hole punch is constructed of high-quality steel that has been carefully annealed to prevent it from becoming brittle. Use this tool to embellish the top layer of your multi-layer leatherwork or a single piece of leather. This tool is also great for pocket corners.
Simply lay the cutting edge of your shaped hole punch on the leather you want to punch and pound the top lightly with a soft head hammer until your hole is punched, a cutting mat is highly recommended. To remove the hole punch from your leather, gently pull vertically, never rocking or twisting the delicate edges of your shaped hole punch. If you think you'll have trouble removing your hole punch, wax the cutting edge of your hole punch before you use it.
- Small: 5.6mm x 3.9mm
- Medium: 8.5mm x 5.4mm
- Large: 11mm x 7.1mm
Dropping your hole punch or striking the cutting edge against a hard surface may cause the blade to bend, break, or dull.
Please keep in mind that leather is a much softer material than card or paper, so while this punch may be able to cut through card or paper, it will likely dull or deform much more rapidly than when used with leather, thus we cannot guarantee its effectiveness in any other application.
This listing is for a single Medium Diamond Shaped Leather Hole Punch only. Photos showing other tools and materials are for illustrative purposes only.
|Net weight||44 g|