Seiwa Leathercraft Tool 4x2.5mm Pricking Iron Stitching Chisel 4-Prong Diamond Point Stitch Punch, to Pierce Sewing Holes in Leather | Goods Japan

Seiwa Leathercraft Tool 4x2.5mm Pricking Iron Stitching Chisel 4-Prong Diamond Point Stitch Punch, to Pierce Sewing Holes in Leather


Available in 1, 2, 3, 4 and 6 prongs, this 2.5mm pricking iron from Seiwa will ensure the finest diamond shaped holes possible. Excellent for the stitching even the smallest leatherwork, this tool is guaranteed to be sharp, straight out of the packaging.



CNY 50.60 *
1 piece

In stock

Japan Postl EMS FedEx

* Incl. VAT excl. Shipping

Available in 1, 2, 3, 4 and 6 prongs, this 2.5mm pricking iron from Seiwa will ensure the finest diamond shaped holes possible. Excellent for the stitching even the smallest leatherwork, this tool is guaranteed to be sharp, straight out of the packaging.

Great for use as a pricking iron to mark where to punch holes with your awl, or as a stitching punch to penetrate actual stitch holes in your leather.

Please note, the prongs on this tool are highly tempered, which makes them very hard, but somewhat brittle, so that overstressed prongs would break off, rather than bend. This is by design, as bent prongs of lower quality pricking irons deform more easily, not only ruining the tool, but also have the potential to ruin your leatherwork by producing permanent uneven stitch holes if undetected. The highly tempered prongs of this quality tool have a dual purpose: To protect your leatherwork from uneven stitching by having the prong break, rather than bend, when overstressed. Safeguarding you from uneven stitching of a bent tool, while giving longer lasting points that require less sharpening and greater penetrating power. This dual feature is of great benefit as it gives you peace of mind, knowing there is no chance of even a single uneven hole to ruin the leather masterpiece you've spent many hours working on.

Please note, the professional nature of this tool means it requires special care. Always use a soft headed hammer (never metal) and tap it into your leather work gently, when removing, always pull it out of your leatherwork straight, never shift it side to side to loosen it or this could snap the prongs. Avoid using leather that is so thick it makes removal difficult. If you work with leather that is thick enough to make removal difficult then a wider pricking iron is recommended. Please store this tool away from other tools or hard objects, do not drop this tool or strike on a hard surface.

The size of this tool is compatible with other 2.5mm Seiwa / Kyoshin Elle Stitching Punches and nippers.

Item ID 20971
Condition New
Manufacturer Seiwa
Manufacturing country Japan
Net weight 60 g
Weight 160 g